Clearview Intelligence - Smart Mobility Solutions


Connex™ is our modular hardware platform, designed for extensibility/with the ability to be extended to support new functionality and future requirements. The Connex hardware platform is easily integrated into third party systems through the provision of a common architecture and open standards interface.

Connex Active

Connex Active: Pedestrian and Bicycle Classifier

Pedestrian and Bicycle Classifier

The Connex Active is an accurate real-time Pedestrian and Bicycle Classifier for active travel detection and analysis. It utilises the latest LIDAR technologies to provide a non-invasive detection and classification solution for pedestrians and bicycles.

Designed for permanent use alongside foot and cycle paths as a solar or mains powered solution within a single unit. The detection range is configurable up to 7 metres without the need for an additional receiver unit as seen in traditional solutions of this type.

The use of LIDAR technology enables the creation of virtual lanes based on the distance of the object detected, this can be used to understand if potential conflicts are occurring on segregated pedestrian and cycle paths.

An optional 4G or ethernet communications module provides the ability to deliver real-time or scheduled data to Clearview’s Insight® Data Management platform or to any other system using open standards data formats and protocols.

The integrated contact closure and logic controller means the unit can be used for active travel safety schemes and data collection all in a single solution.


  • 95% pedestrian and bicycle classification with direction
  • 98% pedestrian and bicycle detection with direction
  • Integrated real-time communications
  • Integrated general-purpose input/output
  • Solar, power over ethernet or mains powered
  • Data Integration with Insight but data also available to third parties
  • Detection up to 7m from the counter
  • Virtual lanes to detect adherence to pedestrian and cycle lane designation


  • Real-time communications provide instant data on pedestrian and bicycle users to understand the potential impact on services and infrastructure.
  • Sustainable solar-powered classifier with integrated communications provides the ideal off-grid solution, enabling deployment in rural areas and reducing the costs of provisioning power.
  • Automated data retrieval, monitoring and reporting through Insight provides an easy to use platform for maintenance and analysis.
  • Integrated general-purpose input and output enables the solution to be used to trigger external systems such as Vehicle Activated Signs for safety schemes.
  • Non-invasive detection reduces installation costs compared to loop/piezo solutions and removes the risk of damage caused by pavement repairs and works by services.

Connex Traffic

Connex Traffic

Flexibility & Accuracy

Connex Traffic is the latest generation of automatic traffic counter designed to provide a high degree of flexibility and accuracy.

Based on Clearview’s Connex Modular Hardware platform, Connex Traffic offers both inductive loop and wireless sensor options for real-time count and classification, enabling deployment in a variety of environments and applications.

Designed from the ground up, for ease of integration utilising open industry standard data formats and communication protocols, the base system provides 16 inductive loops and two internal module slots for different combinations of communications or sensors. Connex Traffic incorporates machine learning technology to provide a higher degree of classification when using inductive loops for data collection.

Communication options include support for the latest low power LTE-M and NB-IoT technologies alongside 2/4G, PoE and RS232/485.

Connex Traffic provides additional functionality to enable the intelligent control of external devices such as Variable Message Signs (VMS) via the General Purpose I/O port and Programmable Logic Controller. This combination of external control and logic enables Connex Traffic to form the backbone of innovative solutions to monitor and inform of potential hazards such as queuing vehicles, turning vehicles and tailgating.


  • Real time vehicle counter providing individual vehicle records.
  • Modular architecture supports different sensors and communications.
  • Supports latest IoT technologies with IP communications over Ethernet, Cellular (2G/4G), LTE-M1, NB-IOT.
  • Can be mains, solar or PoE powered.
  • Provides Count, Direction, Class, Speed, Length, Gap and Headway by lane
  • 16 x inductive loop ports/M100 magnetometers via RS485 (option)
  • Sends vehicle data in JSON format using MQTT messaging protocol to Insight Platform/AWS IoT or standalone MQTT server (available 2021).
  • Automatic retrieval of up to 1 Million individual vehicle records after a power/communications outage.
  • Stores up to 60 Million individual vehicle data records in the onboard SD card for local or remote download
  • Low power consumption and compact design
  • Optional IP67 enclosure to provide flexibility with deployment
  • Output to control external devices via General Purpose Input/Output and built in Programmable Logic Controller


  • Superior vehicle classification accuracy utilising Machine Learning to better identify similar classes (Bus, HGV)
  • Flexibility of sensors and communications enables a large range of configuration options to maximise budget and performance.
  • Dedicated security hardware ensures real-time data delivery without compromising security.
  • Sustainable operation using solar power to reduce costs and support climate change objectives.
  • Single architecture reduces learning curve and complexity of integration.
  • Modular approach enables rapid development of new technologies provide a future proof solution.
  • Open data format simplifies integration and costs with an IoT industry message protocol.
  • Can be combined with Connex Active to provide Pedestrian and Cycle classification via Lidar sensor in a single unit reduce complexity and communication costs.